Laser Tracker SMR Accessories

JEOC

The tripod adapter is a magnetic mount for installing a 1.5-inch SMR or ball reflector on a threaded tripod or tribrach.The magnetic interface holds the compatible 1.5-inch sphere, while the threaded connection enables installation on the supporting survey hardware. The source identifies a 5/8-inch threaded mounting interface and also references use with 3/8-inch tripods and tribrachs; verify the required thread arrangement before ordering.This format provides a practical way to support spherical reflectors on tripod- or tribrach-based setups without changing the reflector format. Benefits Supports tripod- and tribrach-based positioning of compatible spherical reflectors. Allows the same adapter format to be considered for both SMR and ball-reflector setups. Applications Tripod-mounted SMR positioning Tribrach-mounted ball-reflector positioning Surveying and metrology reflector setups

JEOC

The reflector adapter provides an interface between a Swiss spigot and a 1.5-inch SMR or ball reflector. Its defined 86 mm target height supports reflector positioning in compatible measurement setups.An N52 neodymium magnet retains the reflector, while the ergonomically designed button supports handling during installation and removal. The adapter provides a 17.37° look-down angle.This configuration is intended for professional measurement workflows that require a 1.5-inch SMR or ball reflector to be mounted on a Swiss spigot. Confirm the required reflector diameter, spigot interface and 86 mm target height against the measurement procedure before ordering. Benefits Connects the stated reflector format to a Swiss spigot without changing the specified target height. Magnetic retention supports reflector installation and removal during measurement setup. The published target height and look-down angle allow the adapter geometry to be checked before procurement. Applications Professional measurement setups using a 1.5-inch SMR Ball-reflector mounting on a Swiss spigot Industrial metrology reflector positioning

Metricop

The metal adapter and magnetic drift nest are positioning accessories for 1.5-inch ball reflectors used with laser trackers. Two configurations are available: a self-tapping holder and a metal magnetic drift nest.The holder uses an M6 self-tapping screw and is specified for paramagnetic materials. It provides a mounting point for the compatible 1.5-inch ball reflector in industrial measurement workflows.The drift nest accepts 1.5-inch spheres and uses double-sided magnets. Its magnetic arrangement supports reflector positioning where a magnetic nest is appropriate for the workpiece or measurement setup.These accessories are intended for laser tracker measurement tasks, including industrial metrology and reflector placement. Select the adapter when an M6 self-tapping mounting method is required, or choose the drift nest for a double-sided magnetic configuration. Benefits Provides a defined mounting point for a compatible ball reflector Supports selection between screw-mounted and magnetic positioning methods Enables reflector placement on compatible paramagnetic materials Applications Laser tracker measurement Industrial metrology Ball reflector positioning